The most valuable airspace in the world

The Most valuable Airspace in the World

This is east Asia, comprised of China, Japan, Korea, and Taiwan, and this is Europe.

2.4 billion people live in these two idiots, 1/ third of the population of the world. More impressively, each of these two regions has a GDP of about $20 trillion. Combined, just these countries account for half of the world’s economic activity.

They are two of the world’s most dense, most the developed, and most economically interlinked reasons, and at home to the world’s largest and most influential cities eight playing doing them is just one country- Russia.

This more or less means that on country controls whether Europe can get to Asia and vice versa, and for a while, they could not.

During the Cold War, almost universally, non-Soviet airlines were not allowed to fly over the Soviet Union. This proved a massive barrier to travel.

In the 1950s, flying on BOAC, who later becomes British Airways, the fastest route from London to Tokyo involved leaving London at 10 AM on Friday and stopping in Rome, Beirut, Bahrain, Karachi, Kolkata, Yangon, Bangkok, and Manila before finally arriving in Tokyo at 6 am on a Sunday.

All in all, that was 36 hours and 10,000 miles of travel to get between two cities 6000 miles apart, and that was also their first service on the comic jet plane.

Their slower and cheaper propeller plane service would leave London on a Sunday and not arrive in Tokyo until Thursday after 88 hours of travel. It was just usually inefficient, but there is a better way over the arctic was the first to the blocking process overflying the Arctic, but other airlines soon followed.

These roads were fast used to get to the American west coast more quickly. This involves developing new navigation systems to overcome the issue of the traditional magnetic compass is not working correctly in the high north.

In the 1950s, no commercial airplane had the range to fly to the American west coast nonstop but what is this new polar route they would take an irritably quick way from Copenhagen stopping in Kangerlussuaq Greenland and Winnipeg, Canada before arriving in Los Angeles. This cut what was previously a 36-hour trip down to 22.

With essays having to prove that commercial fires over the Arctic were both safe and commercially viable, other airlines quickly followed not only setting up routes to the American west coast but also the far east.

The most direct route from London to Tokyo flies over Siberia, but since that area space was close to the alliance, choose another way the other way around the world.

In 1960, only 40,000 people lived in Anchorage, Alaska and Alaska had just become a state the year before but is the airport emerged as a crucial stopping point between Europe and Asia.

BOAC’s twice-weekly polar route from London to Tokyo and leave Heathrow at 1:45 PM arrive in anchorage is 1/2 hours later stuff for an hour to refill, and then fly the remaining seven hours to Tokyo.

All in all, it was timetabled to take only 17 1/2 hours half of what the trip took before. It was as drastic a reduction in travel time as Wayne Concorde cut NewYork to London flights from six hours to three. BOAC wasn’t the only one.

All the major European career set up routes to the far east via Anchorage in the 1960s and 1970s. While anchorage these only a few dozen daily commercials fires mostly to the continental US today, in the 1970s, it was served by Air France, SAS, KLM, Iberia, Lufthansa, Japan Airlines, Korean Air, and more.

This tiny town in Alaska quickly became one of the most connected and cosmopolitan areas of the world, with passengers on flight cruise from all over the world stopping overall because of where it was.

As aircraft became more advanced with more prolonged rains, there were a few airlines that managed to stop in Anchorage on their way from Europe to East Asia.

Finnair, for example, starting flying from Helsinki to Tokyo nonstop in 1983 by operating in the international area space north of Russia over the north pole. This made what is today a nine-hour flight 13 hours, but it was still faster than stopping in and anchorage.

Overwhelming, though, airlines continue to fly through Anchorage. Eventually, though, the Soviet Union did, of course, fall in 1991, and with that, Russia starts it to grant overflight rides to European and East Asian airlines.

Their first head to modernize and Anglicize their air traffic control system. All international pilots and air traffic controllers worldwide speak English, but before, since there were few international flights over Russia, the Russian air traffic controllers didn’t speak English.

Once the changes were made, airlines quickly switched to flying non stop from Europe to Asia over Siberia. Now that left Anchorage mostly deserted.

The airport built a large and modern international terminal in 1982 to handle all the traffic passing through the airport, but then, less than years later, all those airlines that kept the busy airport left in droves.

Today, that international terminal, built to handle hundreds of flights per month, only sees a trip in a few days. Russia, meanwhile, is prospering thanks to the opening up of its airspace.

Flying to Asia over Siberia saves airlines vast amounts of time and money, so Russia, therefore, charges airlines vast amounts of money to do so.

Exact numbers vary by airline and are kept secret, but for each round trip flight between Europe and Asia, Siberian overflight fees are believed to account for up to $100 of a single passenger’s ticket price.

Russia has an enormous amount of power by controlling this airspace, and they use it to their advantage. One hundred thirty-three countries have signed the International Civil Aviation Organisation’s Transit Agreement, which essentially allows airlines from any country to fly through the signatory’s airspace, but Russia, however, has not, so they can pick and choose which country’s airlines gt to fly through their airspace.

The country can and has used its airspace as a geopolitical weapon-in 2014 they threatened to shut down their airspace to European Union airlines in response to sanctions, in 2017 they threatened to close the airspace to Dutch airlines in response to a reduction in landing slots for a Russian airline at Schiphol airport, and in April 2018 they tacitly threatened to close their airspace to US airlines in response to US military action in Syria.

But Russia not only decides which countries can fly in its airspace, but it also determines which specific airlines.

There is more or less a rule that only one airline per European country can overfly Russia.

There are certainly exceptions- both British Airways and Virgin Atlantic are London based, for example, but both overfly Siberia on their routes to Shanghai and Hong Kong, but air France is the only French airline with Siberian overflight rights, Lufthansa is the only German airline with overflight rights, Iberia is the only Spanish airline with overflight rights, and so forth.

For the longest while, this wasn’t a problem. European countries aren’t that big, and few had more than one intercontinental airline, but nowadays, however, that’s changing.

We see more and more budget airlines competing with the large, established carriers in long-haul routes, but, with this system of overflight permissions, the legacy carriers more or less have a monopoly on east routes.

SAS, for example, operates out of Norway, Denmark, and Sweden, and they have Siberian overflights rights that take them to destinations like Tokyo, Beijing, and Shanghai. SAS is, therefore, the only Scandinavian airline allowed to overfly Siberia.

But also in Scandinavia is Norwegian Air. As one of the largest low-cost airlines in the world, Norwegian has pioneered long-haul budget flying, mainly focusing on flights from major European cities to the US.

The airline has said, though, that it wants to expand eastwards. They already have flights from Copenhagen, Oslo, and Stockholm to Bangkok and from London to Singapore, but these destinations are far enough south that they don’t involve flying over Siberia.

The airline has repeatedly applied for Siberian overflight rights and repeatedly been denied. They argue that SAS does not operate any flight from Norway to Asia, so they should be granted permission as the only Norwegian airline but, since SAS is partially registered in Norway, Russia isn’t allowing permission.

Norwegian does have a subsidiary legally registered in the UK. Still, It’s unlikely that Russia would grant overflight rights to this since British Airways and Virgin Atlantic also have overflight rights.

Norwegian airlines also have a subsidiary based in Ireland that does not have an airline with Siberian overflight rights but, SAS also has a subsidiary based in the country, which could mean that Russia will deny rights to this subsidiary too.

As of now, Russia has not granted overflight permission to any budget airline. Others have tried – Icelandic airline Wow Air and Icelandair have attempted to negotiate overflight rights- but Russia views overflights as a way to make money and wants to charge fees that would make it impossible for a low-cost airline.

For now, Wow airline had planned to start flights from Reykjavik to Delhi, India, which, in a direct routing, would fly over Russia but can route around Russia by only adding 45 minutes in extra flight time if an arrangement isn’t made before flights started in December 2018.

Russia is a powerful politically-savvy country that knows that these overflight rights are a vast negotiation tool. Pulling the rights of a country’s airline would be a huge financial blow, and granting rights is also a considerable advantage.

Competition, though, is good for the consumer, and this current system stifles it. Until Russia starts granting overflight rights to budget airlines, nonstop flights to Asia will be sta expensive.

The fact that this shortcut over Siberia is now open at all, however, saves millions of passengers yearly enormous amounts of time and money.

How to Connect Wireless Printer to a Target Device

Nowadays, technology is at its pinnacle point, and with every day, it’s reaching the extreme of innovation and directly or indirectly easing the lives of a human being.

Long ago, the printer’s innovation was astonishing to the world as you can have a copy of any document with ease instead of writing it for hours.

Years back there were black & white printers, but with time colored printers replaced them, but now the technology has taken a sharp turn towards innovation by making each and every device wireless, without the hassle of wires, their damages, and other obstructions now you can connect anywhere with any device in glimpses without even leaving your place.

This technology has also been introduced in printer’s world, but to use this innovation, the first question that arises in our mind is that how to set up a wireless printer or how wireless printer can be connected.

As there are tens of devices which need access to printers for printing operation like mobiles, computers and then within computers windows and Mac have their own way to set up a connection with printers.

Let me chop them down for you that how to set up a wireless printer connection with the target device.

How To Connect Wireless Printer

Firstly place the printer within the range of WI-FI device or router. Depending upon the quality, the range of router varies, but it’s not a big deal; just place your printer within the range of WI-FI device influence and follow these steps as these are universal for all types of devices whether android, windows or Mac, etc.

Now it’s time to turn on the printing device or printer, and you will be establishing the connection to the WI-FI network. So in the first phase, you are not supposed to connect to the computer. This process is mainly dependent on the type of printer being used, but few things must be known before you get in “your WI-FI network name and secondly, its password.”

Built-in system: Most printers will allow you with the built-in menu system, no need of hassle in case your operating system herself would do the job if not, then refer to the manual. Depending upon the type of printer manual is provided with the printer at the time of buying, if it’s not available or lost by any means even then no need to worry, just search pdf file of help-book online.

WPS push to Connect: The most rewarding thing is that if both your printer and router support the WPS push to connect, then it’s a treat; simply push the WPS button on both devices, and within few moments, your connection would automatically be established.

In case your printer doesn’t have a built-in menu but does support the wireless connection, then at first, you are supposed to connect to a computer also. To do so, first, connect your printer to the computer via USB cable. Then using the included software setup, the wireless connection, it’s an onetime process afterward, no need of any cable moves the printer wherever you want, and it would work without any obstruction.

Now the major question of how to wireless connect a printer to the laptop, for this, you have to first see what type of operating system you have, whether windows or mac.

Firstly let me discuss the wireless printer setup on your window computer, for this when the connection with WI-FI device is established simply connect it to the computer, let me help you in this regard that how to connect a wireless printer to laptop or computer;

Go to control panel (depending upon the type of window, if window XP, seven or even ten it would be in the start menu, but for window 8 right-clicking the window’s bottom would serve the purpose. The best way is to search the control panel from the search box of the window (applicable to all windows).

Click “Devices or printers” or “view devices or printers” or any option matching to this, then select your printer from the list (it may take few moments to appear so be patient), then install the drivers if required (for famous printer devices computer will do it herself), and hurrah your connection is established.

For adding a printer on your Mac computer, follow the simple steps, and you would be done with the job.

By clicking the Apple menu, select System Preferences from there.

By selecting “Print and Scan,” press the “+” button at the bottom of the list of printers.

Then simply select your printer and install any software if needed, and the job for the Mac is also done.

For android, it’s not a hard task, simply download the Google Cloud Print app (mostly available as a built-in app on most of the devices if not then download it manually). Firstly connect the printer to a WI-FI network (as discussed earlier), and your android device should also be on the same WI-FI.

Open settings and select “printing” to add your printer, once it’s done then simply open the app which needs the printing operation and click the three dots on the corner, then select the print option from there. Although third-party apps can also be used, we don’t recommend them all.

It’s always preferable to use the app certified form credible agency here in our case by android itself, so Google Cloud Print is always a recommended option to opt for.

There’s another way out as in the case of famous printers like HP, they have their own plugin apps available on play store, just download them, and everything else would be like a piece of cake.

In the case of IOS, it’s way easier than android as we need not download any additional applications like Apple’s built-in feature of Air Print would serve the purpose.

You only need to have an Air Print compatible printer, and both your phone and printer should be same WI-FI network, rest is way simple just open the app which requires printing operation and click the share option or the print icon within the app boundary, it would make you add your printer device to mobile or if it’s already added then just click that device and printing operation would be completed.